Deck Sanding & Staining in Charlotte, NC

Why decks need refinishing

Sun and moisture wear down a wood deck. The surface turns gray, the boards dry out and start to split, and water soaks in instead of running off. A fresh coat of stain and sealer protects the wood and brings back its color.

A simple test

Sprinkle a little water on the deck boards. If it beads up, the finish is still doing its job. If it soaks in and darkens the wood, the deck is ready for a new coat. Faded color on the sunniest parts of the deck and boards that feel rough underfoot are other signs.

How the work goes

Cleaning

The deck is cleaned first, so the stain bonds to the wood and not to dirt.

Sanding and surface preparation

Sanding takes off the weathered layer and rough spots, so the stain goes on evenly.

Staining and sealing

Stain adds color, and the sealer protects the wood from moisture and sun.

Repairs first

Staining over a loose board or a wobbly railing only hides the problem. If boards, stairs or railings need work, we fix them first and combine the repairs and the refinishing into one restoration project, with one written quote.

Weather matters

Stain goes on a clean, dry deck in dry weather, so the forecast plays a part in the schedule.

Choosing a finish

The more pigment a finish has, the better it shields the wood from sun and the more of the grain it hides. Newer, smoother boards look good with a clear or semi-transparent finish, while older, weathered boards often look best under a solid stain.

Caring for a fresh finish

Give the finish time to cure before you put the furniture back. After that, sweep often, rinse off pollen and dirt with a garden hose, and keep planters on stands so water doesn’t sit under them. The sunniest parts of the deck wear first, so check them each spring.

How the estimate works

We look at the deck on site, check the boards and railings, and talk through the finish you want. You get a written, line-item quote with no hidden fees.